taap.digitalnetwork engineering toolkit

What TCP window do I need for 10 Gbps at 100 ms RTT?

Answer
119 MiB bandwidth-delay product

10 Gbps × 0.1 s ÷ 8 = 125,000,000 bytes (119 MiB) in flight. A single TCP flow needs a window at least that large; with a classic 64 KiB window it would reach only 5.24 Mbps.

tcp-bdp · adjust the values
ms
KiB
%
B

The calculation

BDP = 10,000,000,000 bit/s × 0.1 s ÷ 8 = 125,000,000 B
64 KiB window: 65,536 × 8 ÷ 0.1 s = 5.24 Mbps
ItemValue
Bytes in flight (BDP)125,000,000 B
Window needed122,070 KiB
Window scale shift needed (RFC 7323)11 (65,535 × 211 ≥ BDP)
Throughput with 64 KiB window5.24 Mbps
Suggested max socket buffer (2× BDP)250 MB

Linux tuning for this path

sysctl -w net.core.rmem_max=250000000
sysctl -w net.core.wmem_max=250000000
sysctl -w net.ipv4.tcp_rmem="4096 131072 250000000"
sysctl -w net.ipv4.tcp_wmem="4096 65536 250000000"

Window scaling must survive end to end: confirm the wscale option in both SYN and SYN-ACK in a capture. On long paths, packet loss quickly becomes the next limit; add a loss rate in the tool to see the Mathis estimate, and consider BBR congestion control.

More questions like this

1 Gbps · 100 ms1 Gbps · 50 ms100 Mbps · 200 ms1 Gbps · 600 ms10 Gbps · 20 ms

Frequently asked questions

Is the BDP the same as the buffer size?

The BDP is the minimum window to fill the link. Socket buffers are usually set to about twice the BDP so the receiver can keep advertising a full window while the application reads.

Will several parallel flows help?

Yes. N flows with 64 KiB windows reach about N × 5.24 Mbps, until the link or loss becomes the limit.